13S 60A lithium Lithium Battery protection board
Material:PVC+Metal
Size: about 12.7cm/5"x5.2cm/2.04"
Cable:about 29cm/11.41"
[Conversion: 1cm=0.3937 inch, 1inch=2.54 cm]
Applicable for
46.8V (3.6V * 13S) lithium battery & packs
48V (3.7V * 13S) lithium battery & packs
54.6V (4.2V * 13S) lithium battery & packs
Cylindrical Lithium battery (Li-ion)
Prismatic Lithium Polymer battery (Li-Po)
Technical Parameters:
Balanced current: 60mA (VCELL = 4.20V when)
Balanced for: 4.20 ± 0.05 V
Over-charged Protection: 4.20 ± 0.05 V
Over-charged delay: 55mS
Over-charged release: 4.05 ± 0.05 V
Over-discharged threshold: 2.90 ± 0.05 V
Over-discharged delay: 5mS
Over-current Protecton: 60 A
Max Continuing discharge Current : 60A
Max Charge Current : 30A
Static power consumption: less than 200uA
Short-circuit protection function: disconnect the load from the recovery.
The main functions: Over-charged, Over-discharged protection, short circuit protection, over-current protection, with Balancing function.
The board have balancing function. So you may see a balance connector with 13 wires, below chart shows how to connect the wires onto 13 batteries to realize balancing and protection.
The Positive output on Battery Pack (48V + )could connecting to charger positive pole (charger +)
Battery Pack (48V - ) connecting with B- on board
Chip board P- connecting to Charger Negative Pole (charger -)
Chip board P- could be Negative output for charger, motor, controller
Battery B+ could be Positive output for charger, motor, controller
Package Included:
1 x Lithium BMS Protection PCB
1 x 13pin Cable
Note:
-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
-Please allow 1-3CM differs due to manual measurement.
-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
1.Wir nehmen nur PayPal.
2.Alle gängigen Kreditkarten werden durch sichere Zahlungsprozessor von PayPal angenommen.
3.Die Zahlung muss innerhalb 7 Werktage von Auktion Closing empfangen werden.
4.Wir schicken zu Ihrer eBay oder Paypal-Adresse. Bitte stellen Sie sich sicher, dass Ihr eBay und Paypal-Adresse korrekt ist, bevor Sie zahlen.
1.Wir versenden zu Ihrer eBay oder Paypal-Adresse. Bitte stellen Sie sicher, dass Ihr eBay und Paypal-Adresse korrekt ist, bevor Sie zahlen.
2.Einzelteile werden innerhalb des 1-3 Werktages versendet, als wir Zahlung erhalten.
3.Lieferfrist hängt vom Bestimmungsort und von anderen Faktoren ab;
4.Hinweis für internationale Käufer:
a.Einfuhrzölle, Steuern und Gebühren sind nicht in den Artikelpreis oder den Versandkosten enthalten. Diese Gebühren sind die Verantwortlichkeit des Kunden. Wir werden unser Bestes versuchen, um das Risiko der Zölle zu reduzieren.
b.Bitte überprüfen Sie mit Zollamt Ihres Landes, um festzustellen, was diese zusätzlichen Kosten vor dem Kaufen sind.