PREMIUM Reparatursatz REVOX B77 KOMPLETT Kondensatoren Trimmer Repairkit MK1-MK2

EUR 159,99 Sofort-Kaufen, EUR 5,99 Versand, eBay-Käuferschutz
Verkäufer: bosch-trading ✉️ (16.541) 100%, Artikelstandort: Korb-Kleinheppach, DE, Versand nach: WORLDWIDE, Artikelnummer: 224281326185 PREMIUM Reparatursatz REVOX B77 KOMPLETT Kondensatoren Trimmer Repairkit MK1-MK2.

Now with German and English instructions as PDF file after purchase.

To customers in the United States: All shipments with USPS tracking no. and duty free up to $ 800. Customers from countries we do not ship to, please contact us directly to find a solution. Leider werden von Nichicon keine Audio-Elkos mehr produziert. Für alle Audio-Elkos bis ca. 100µF wurde die Produktion eingestellt. Sie sind "END OF LIFE". Das gilt ebenso für die Elna Silmic II und Rubycon Black Gate. Wir haben uns bevorratet und bieten diesen Reparatursatz an, solange der Vorrat reicht. Für Vorschläge zu einer passenden Alternative bedanken wir uns.

PREMIUM  REVOX B77 Reparatursatz NICHICON FINE GOLD KOMPLETT.  TOP Klangqualität. Für alle Versionen der Revox B77, 2-Spur und 4-Spur, von MK I bis MK II (MK 1 bis MK 2)

Nicht für die Dolby-Platinen und Spezialversionen (Autostart, Alternative-Control, Zyklus-Steuerung, Pilotton-Kopf, Dia-Synchro...).

Bestehend aus sehr hochwertigen Bauteilen:

NICHICON FINE GOLD Audiokondensatoren 100% Original, Made in Japan Gekapselte PIHER Trimmer WIMA Entstör-Kondensatoren

Es ist Ersatz für ALLE Elektrolyt- Tantal- Entstör- und Motor-Kondensatoren und für ALLE Trimmer enthalten, die in der Revox B77 verbaut sind.

Alle radialen und axialen Elkos, sowie alle Tantals werden durch radiale Elkos ersetzt.

Einzeln in Tüten verpackt und den Platinen zugeordnet.

Je nach Version werden ein paar Bauteile übrig bleiben.

Die abgebildeten Platinen und die Bandmaschine sind NICHT enthalten !

Aufgrund des Alters der Maschine wird dringend empfohlen, diese Bauteile zu ersetzten. Die alten Miniprint oder RIFA Kondensatoren sind bekannt dafür, dass Sie sich in Rauch auflösen. Ganz wichtig ist auch der Kondensator direkt hinter der Netzbuchse. Die meisten Frako, Philips und Siemens Elkos sind mittlerweile defekt. Bei den Trimmern rosten und brechen einfach die Schleifkontakte.

Zum Thema Bypasskondensatoren, bzw. Koppelkondensatoren: Dafür gibt es nach meiner Überzeugung absolut keine Notwendigkeit. Wer den doppelten Aufwand haben möchte, kann dies natürlich tun...

Lieferumfang:

Elko's und Trimmer für alle 5 Audio-Platinen wie folgt:

1 x für 1.177.220 / 221 Eingangs-Vorverstärker ( Input Amplifier ) alle Versionen 1 x für 1.177.230 / 232 / 233 / 237 Aufnahme-Verstärker ( Record Amplifer ) alle Versionen 1 x für 1.177.240 / 242 / 243 Oszillator ( Oscillator )  alle Versionen 1 x für 1.177.250 / 252 / 253 / 257 / 258 Wiedergabeverstärker ( Playback Amplifier )  alle Versionen 1 x für 1.177.260 Monitorverstärker ( Monitor Amplifier )  alle Versionen

Elko’s, Trimmer, Motorkondensatoren, Ersatz für Rifa Miniprint-Kondensatoren wie folgt:

1 x für 1.177.310 / 311 / 312 Netzteil ( Power Supply )  alle Versionen 1 x für Motorkondensatoren ( Motor Capacitors ) 1 x für 1.177.315 / 317 Laufwerkssteuerung ( Tape Drive Control )  alle Versionen 1 x für 1.177.135 / 136 / 137 Bandzugumschalter ( Tape Tension Switch ) 1 x für 1.177.325 / 326 / 327 Drehzahlregelung ( Capstan Speed Control )

Ihre Vorteile: - Wir verkaufen ausschliesslich hochwertige und originale Bauteile aus aktueller Produktion. - Mit dem Versand der Bauteile erhalten Sie gleichzeitig per E-Mail oder als Download-Link eine  ausführlicher Anleitung Deutsch / Englisch mit Schaltplan und Platinen-Layout als .pdf Datei. (Bitte prüfen Sie Ihren SPAM-Ordner, fall Sie keine Anleitung bekommen haben) - Wir verkaufen nur Bauteile, die wir selber in unserer Werkstatt verwenden und in den jeweiligen Maschinen getestet haben. - Wir verkaufen nur Bauteile, die in dieser Kombination auch funktionieren, denn das ist bei einer Zusammenstellung nach Schaltplan häufig nicht der Fall. Schaltpläne enthalten häufig auch Fehler, es gab z.B. auch damals Updates und neue Revisionen. - Wir verkaufen nur Bauteile, mit denen die Werks-Spezifikationen eingehalten, bzw. sogar meistens auch übertroffen werden. - Bei Fragen, oder Problemen sind wir für Sie da und helfen gerne weiter. Mit diesen Bauteilen wurden mehrere hundert Maschinen umgebaut, ohne eine einzige Reklamation. In diesem Set sind alle relevanten anfälligen und ausfallgefährdeten Bauteile enthalten.

In der Einbau-Anleitung wird beschrieben wie die alten Trimmer mit einem Multimeter durchgemessen werden. Danach werden die neuen Trimmer erst auf diesen Widerstandswert eingestellt und anschliessend eingelötet. So lässt sich in den meisten Fällen eine Neueinmessung umgehen.

Lötkenntnisse und Elektronik-Grundwissen muss vorhanden sein !!! Auf keinen Fall einfach so an der Maschine herumschrauben, die Gefahr etwas zu verstellen, oder zu beschädigen ist sehr hoch !!! Vorsichtsmassnahmen: In dem Gerät existieren lebensgefährliche Spannungen! Bitte ziehen Sie bei allen Arbeiten am Gerät den Netzstecker! Achten Sie bitte darauf das keine Teile verlorengehen oder in das Gerät fallen! Wir übernehmen keine Verantwortung für die durchgeführten Arbeiten !

Bei diesem Artikel handelt es sich um einen individuell für Sie zusammengestellten und personalisierten Artikel. Die Einbauanleitung die Sie als PDF Datei erhalten ist ebenso Bestandteil dieses Artikels. Eine Rücknahme ist somit leider nicht möglich. Wir bitte um Verständnis.

ENGLISH: Unfortunately, Nichicon no longer produces audio electrolytic capacitors. Production has been discontinued for all audio electrolytic capacitors up to approx. 100µF. They are "END OF LIFE". This also applies to the Elna Silmic II and Rubycon Black Gate. We have stocked up and are offering this repair kit while stocks last. Thank you for suggestions for a suitable alternative.

PREMIUM REVOX B77 repair kit NICHICON FINE GOLD COMPLETE. TOP sound quality. For all versions of the Revox B77, 2-Track and 4-Track, from MK I to MK II (MK 1 to MK 2)

Not for the Dolby boards and special versions (Autostart, Alternative-Control, Cycle-Control, Pilot-Head, Dia-Synchro...).

Consists of very high quality components: 

NICHICON FINE GOLD audio capacitors 100% Original, Made in Japan Encapsulated PIHER trimmer WIMA suppression capacitors 

Include replacement for ALL electrolytic, tantalum, suppression and motor capacitors and for ALL trimmers that are installed in the Revox B77.

All radial and axial electrolytic capacitors as well as all tantalum are replaced by radial electrolytic capacitors.

Individually packed in bags and assigned to the circuit boards. 

Depending on the version, a few components will be left over.

The printed circuit boards and the tape recorder are NOT included!

Due to the age of the machine, it is strongly recommended that these components be replaced.  The old miniprint or RIFA capacitors are known to go up in smoke.  The capacitor directly behind the power socket is also very important. Most of the Frako, Philips and Siemens electrolytic capacitors are now defective. With the trimmers, the sliding contacts simply rust and break. 

On the subject of bypass capacitors or coupling capacitors: I believe there is absolutely no need for that. If you want double the effort, you can of course do so  …

Scope of delivery:  

Capacitors and trimmers for all 5 audio boards as follows:  

1 x for 1.177.220 / 221 input preamplifier (input amplifier) all versions 1 x for 1.177.230 / 232/233/237 recording amplifiers (Record Amplifer) all versions 1 x for 1.177.240 / 242/243 oscillator (Oscillator) all versions 1 x for 1.177.250 / 252/253/257/258 playback amplifier (playback amplifier) all versions 1 x for 1,177,260 monitor amplifiers, all versions  

Elko’s, trimmers, motor capacitors, replacement for Rifa miniprint capacitors as follows:  

1 x for 1.177.310 / 311/312 power supply unit (power supply) all versions   1 x for motor capacitors 1 x for 1.177.315 / 317 drive control (Tape Drive Control) all versions 1 x for 1.177.135 / 136/137 tape tension switch 1 x for 1.177.325 / 326/327 speed control (Capstan Speed Control)

Your advantages: - We only sell high-quality and original components from current production. - When the components are dispatched, you will receive detailed instructions in German / English with a circuit diagram and circuit board layout as a .pdf file by email or as a download link. (Please check your SPAM folder if you have not received any instructions) - We only sell components that we use ourselves in our workshop and have tested in the respective machines. - We only sell components that also work in this combination, because this is often not the case with a combination according to the circuit diagram. Circuit diagrams often also contain errors, e.g. even then updates and new revisions. - We only sell components with which the factory specifications are adhered to, or in most cases even exceeded. - If you have any questions or problems, we are there for you and will be happy to help. Several hundred machines were converted with these components without a single complaint. This set contains all relevant vulnerable and failure-prone components.

The installation instructions describe how the old trimmers are measured with a multimeter. Then the new trimmers are first set to this resistance value and then soldered in. In this way, a new measurement can be avoided in most cases. Soldering skills and basic electronics knowledge must be available! In no case simply screw around the machine, the risk of adjusting something or damaging it is very high! Precautions: Lethal voltages exist in the device! Please pull the power plug when working on the device! Please make sure that no parts are lost or fall into the device! We do not take any responsibility for the work done!

This item is an individually compiled and personalized item for you. The installation instructions that you receive as a PDF file are also part of this item. A return is unfortunately not possible. We ask for your understanding.

Ich weise darauf hin dass, s ofern nicht gesondert oben im Text angegeben,  dieses Produkt ein  präzise nachgefertigtes Ersatzteil ist und nicht ein Original Teil des Herstellers.  Rechtlich geschützte Markennamen sowie Warenbezeichnungen, Gerätebezeichnungen und original Ersatzteilenummern oder Bezeichnungen gehören den jeweiligen Eigentümern und dienen ausschließlich der Erklärung zu welchem Gerät der angebotene Artikel zugeordnet werden kann (Kompatibilitätskennzeichnung). Please contact me if you face any issues with your order before opening a case or leaving a neutral or negative feedback. 100% Satisfaction guaranteed or money will be refunded.If you do not receive your item after 10 working days within European Community, or 25 working days to the rest of the world: Please get in touch with me. Do not make me responsible for mail delays and customs. Your purchase will be shipped at the same day that I receive the payment of your order. Shipment from Monday to Friday in the same day of the purchase until 15h00 (GMT +1) If you change your mind about your purchase, you can return the item for a full refund within 30 days of the purchase date. Return conditions: Closed Package with all items in the original condition that were sent.
  • Condition: Neu
  • Marke: Revox
  • Produktart: Tonbandgerät
  • Modell: B77

PicClick Insights - PREMIUM Reparatursatz REVOX B77 KOMPLETT Kondensatoren Trimmer Repairkit MK1-MK2 PicClick Exklusiv

  •  Popularität - 263 Beobachter, 0.2 neue Beobachter pro Tag, 1.199 days for sale on eBay. Super hohe beobachtend. 183 verkauft, 6 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 16.541+ artikel verkauft. 0% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv