Isolier und Reparaturband, Butylkautschukband selbstverschweißend,5 lfm, 40 mm

Verkauft Siehe ähnliche Artikel EUR 4,99 Sofort-Kaufen oder Preisvorschlag, Kostenloser Versand, eBay-Käuferschutz
Verkäufer: digital_concept ✉️ (96.287) 100%, Artikelstandort: Moormerland, DE, Versand nach: WORLDWIDE, Artikelnummer: 121795342326 Isolier und Reparaturband, Butylkautschukband selbstverschweißend,5 lfm, 40 mm . 1 Rolle selbstverschweißendes Butylkautschukband der Fa. Scapa Tapes original verpackt. Länge 5 m Breite 40 mm Stärke 2 mm Farbe schwarz Produktnumnmer 2573 Wasserdicht ideal für LV-Kabel und Telekommunikationsanlagen Bei größeren Mengen, machen Sie uns bitte einen Preisvorschlag. technische Datenblatt  Scapa 2573 Electrical Sealing Putty DESCRIPTION Scapa 2573 is a conformable, rubbery, insulating putty. Its colour is black. APPLICATIONS For use as a moisture proof seal on telecommunication networks and distribution systems. As a water barrier material on high voltage joints and terminations, and as an insulation and water barrier material in low voltage applications. PRODUCT BENEFITS Excellent properties, staying elastic and non‐hardening throughout its service life. After application, the compound develops good adhesion to surfaces such as metal and most rubber and plastic cable insulation and sheathing materials. The thickness of the tape makes filling irregular shapes and voids easy, speedy and economical. The compound can be used with acrylic and epoxy systems. It is also suitable for use with many joint‐ box filling compounds (e.g. cold and hot pouring compounds up to 160oC). Highly resistant to water and ozone. Service temperature –30 to +80oC. Supplied in an easy to handle and apply tape form. The product is interleaved with a disposable siliconised paper liner. TECHNICAL PROPERTIES Technical Property Nominal Value Unit Test Method Volume Resistivity 5 x 1012 Ohm.m ASTM D257 Thickness 2 mm ‐ Tensile Strength 0.2 MPa BS 903 Dielectric Strength 16 kV/mm ASTM D149 STANDARD PRESENTATIONS Roll Width: 40mm Roll Length: 5m Packaging: Individually boxed rolls Core: 38mm dense plastic Branding: Scapa RECOMMENDATIONS Care should be taken to avoid direct contact between the tape and petroleum‐type solvents and oils. Oils may affect the electrical properties of the tape. To obtain maximum adhesion to substrates, surfaces must be free of oil, dust wax or lubricant blooms. The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10°C and +30°C. Under these conditions, the storage life of the tape in a temperate climate will be at least three years. This Technical Data Sheet (TDS) is provided by Scapa for information only. The contents of this TDS are considered to be reliable but accuracy is not guaranteed. The results shown in this TDS may not be relevant to all users of the product and it is the user’s responsibility to determine the suitability of the product for its intended purpose. Scapa expressly disclaims all express or implied warranties including merchantability and fitness for a particular purpose to the fullest extent permitted by law and does not accept responsibility or liability (whether direct, indirect, or consequential) arising from use of the product or reliance on the TDS. Scapa does not exclude liability for death or personal injury arising from its negligence or fraud. Scapa refers to Scapa Group plc and ist subsidiaries. Version: 1 Date: 23/10/2015 Page: 1 of 2 Scapa 2573 Electrical Sealing Putty DESCRIPTION Scapa 2573 is a conformable, rubbery, insulating putty. Its colour is black. APPLICATIONS For use as a moisture proof seal on telecommunication networks and distribution systems. As a water barrier material on high voltage joints and terminations, and as an insulation and water barrier material in low voltage applications. PRODUCT BENEFITS Excellent properties, staying elastic and non‐hardening throughout its service life. After application, the compound develops good adhesion to surfaces such as metal and most rubber and plastic cable insulation and sheathing materials. The thickness of the tape makes filling irregular shapes and voids easy, speedy and economical. The compound can be used with acrylic and epoxy systems. It is also suitable for use with many joint‐ box filling compounds (e.g. cold and hot pouring compounds up to 160oC). Highly resistant to water and ozone. Service temperature –30 to +80oC. Supplied in an easy to handle and apply tape form. The product is interleaved with a disposable siliconised paper liner. TECHNICAL PROPERTIES Technical Property Nominal Value Unit Test Method Volume Resistivity 5 x 1012 Ohm.m ASTM D257 Thickness 2 mm ‐ Tensile Strength 0.2 MPa BS 903 Dielectric Strength 16 kV/mm ASTM D149 STANDARD PRESENTATIONS Roll Width: 40mm Roll Length: 5m Packaging: Individually boxed rolls Core: 38mm dense plastic Branding: Scapa RECOMMENDATIONS Care should be taken to avoid direct contact between the tape and petroleum‐type solvents and oils. Oils may affect the electrical properties of the tape. To obtain maximum adhesion to substrates, surfaces must be free of oil, dust wax or lubricant blooms. The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10°C and +30°C. Under these conditions, the storage life of the tape in a temperate
  • Condition: Neu
  • Marke: Scapa
  • Herstellernummer: 2573
  • Anzahl der Einheiten: 1

PicClick Insights - Isolier und Reparaturband, Butylkautschukband selbstverschweißend,5 lfm, 40 mm PicClick Exklusiv

  •  Popularität - 5 Beobachter, 0.0 neue Beobachter pro Tag, 600 days for sale on eBay. Super hohe beobachtend. 47 verkauft, 10 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 96.287+ artikel verkauft. 0% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv