RF Amplifier Module LNA Board Broadband Signal Receiver Low Noise 0.1-6000MHz
EUR 7,45 Sofort-Kaufen, EUR 0,95 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: xmodule ✉️ (1.129) 99.4%,
Artikelstandort: ShenZhen, CN,
Versand nach: EUROPE, ASIA, US, CA, AU,
Artikelnummer: 185855222850
RF Amplifier Module LNA Board Broadband Signal Receiver Low Noise 0.1-6000MHz. we have lots of items in stock，if you need more items，please contact us
0.1-2000MHz 30dB
Description: This product with wide frequency range, high gain, low noise figure.
This product can be applied to various RF receive front-end and increases communication distance.
Used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise rf signal amplification.
Specifications: Size: 25*52mm
Diameter of end: 5mm
Color: green + gold
Operating frequency: 0.1-2000MHz
Amplifier gain:
F=0.1MHz, gain=32dB
F=500Mhz, gain=31dB
F=1000MHz, gain=29dB
F=1500Mhz, gain=25dB
F=2000MHz, gain=20dB
Maximum power output: +10dBm (10mW)
Power supply voltage: 6-12V DC
System impedance：50Ω
Tips: 1.When working frequency is less than 500 Mhz, it get well gain flatness, can make it less than 1dB after careful adjustment. The lower frequency the higher gain consistency.
2.Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1uF, working to 0.1MHz. Increase the input and output capacitance. appropriately, can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz.
3.When the power supply voltage changes in 5-8V, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control.
4.When the power supply voltage in the 8-10V, the low frequency end gain up to 30dB, at this time the amplifier has a low noise coefficient and good stability.
5.When the voltage is 12V, reach maximum gain, the low frequency end gain of 32.5dB. Package Included: 1PC 0.1-2000MHz RF Wideband Amplifier 30dB Low-noise LNA Broadband Module Receiver
0.2-1500MHz 60dB
Description:
The amplifier is based on the original 0.1-2000MHz 30dB amplifier, using two-stage cascade is made with low noise, high gain 60dB, and is suitable to detect weak signals.
Amplifier Parameters Indicators:
Operating frequency: 0.2-1500MHz
Amplifier Gain: 60dB
Maximum output power: + 10dBm (10mW) @ 1dB compression point
Working Current: 35mA (9V)
Supply voltage: 6-12V DC
System Impedance: 50ohms
The amplifier uses some tips:
1) The amplifier at the operating frequency of less than 500MHz, has a very good gain flatness. The lower the frequency, the higher the gain consistency.
2) The lower limit of the operating frequency of the amplifier input and output capacitors are subject to default is 0.1uF, it can work to 0.2MHz; you can increase the input and output capacitors to extend the lower frequency limit. Applications should pay attention to enhance the power supply decoupling and regulator.
3) When the supply voltage 5-8V changes, can be used as a variable gain amplifier, the gain with the power supply voltage increases. DA control with the power supply voltage, you can control the amplifier gain, the gain adjustment.
4) When the supply voltage is 8-10V, low-end gain of 30dB, at which point the amplifier has a low noise figure and good stability.
5) When the voltage is 12V, maximum gain, low frequency gain up to 32.5dB.
6) Since the amplifier gain very high (60dB), the input attention overload (Fmax = -50dBm), in use should follow the relevant principles of RF and microwave circuit layout.
Package Included:
1PC × 0.2-1500MHz 60dB RF Broadband Amplifier
50-4000MHz 0.6dB
Description: This RF Amplifier features low noise figure, is a LNA RF Amplifier.
Generally used as a high frequency or intermediate frequency preamplifier for a wide range of radio receivers, as well as amplifying circuits of highly sensitive electronic detection devices.
In the case of amplifying weak signal, the noise of the amplifier itself may be very serious, so it is hoped that this noise will be reduced to improve the signal-to-noise ratio of the output.
Application:
LNA for the main mobile communication base station infrastructure applications, such as wireless communication transceiver card, tower mounted amplifier (TMA), combiner, Repeaters, and distal/digital wireless wide band end equipment application design.
This RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB.
Specifications: LNA: 50-4000Mhz NF: SPF5189Z LNA0: 0.6dB Amplifier: FM Size: 34x25mm / 1.33 x1.0inch Package Included: 1PC LNA 50-4000MHz 0.6dB SPF5189 RF Amplifier
5-6000MHz 20dB
Description: This is a 5-6000MHz RF signal power amplifier with 20dB gain.
It has big dynamic range and wide operating frequency range.
The power supply voltage is 5V DC, and working current is 85mA.
Maximum output power is +21dBm(100mW)@1dB compression point.
It is suitable for all types of fixed gain amplification of RF signal.
Specifications: Operating Frequency: 5--6000MHz Amplifier Gain: 20dB Max. Output Power: +21dBm(100mW)@1dB compression point Working Current: 85mA (5V) Power Supply Voltage: 5V DC System Impedance: 50ohm Size: 34*25mm / 1.33*0.98in
Note:
In use should follow the relevant principles of RF and microwave circuit layout.
Package Included: 1PC × 5-6000MHz 20dB RF Power Amplifier Payment Method
Description: This product with wide frequency range, high gain, low noise figure.
This product can be applied to various RF receive front-end and increases communication distance.
Used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise rf signal amplification.
Specifications: Size: 25*52mm
Diameter of end: 5mm
Color: green + gold
Operating frequency: 0.1-2000MHz
Amplifier gain:
F=0.1MHz, gain=32dB
F=500Mhz, gain=31dB
F=1000MHz, gain=29dB
F=1500Mhz, gain=25dB
F=2000MHz, gain=20dB
Maximum power output: +10dBm (10mW)
Power supply voltage: 6-12V DC
System impedance：50Ω
Tips: 1.When working frequency is less than 500 Mhz, it get well gain flatness, can make it less than 1dB after careful adjustment. The lower frequency the higher gain consistency.
2.Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1uF, working to 0.1MHz. Increase the input and output capacitance. appropriately, can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz.
3.When the power supply voltage changes in 5-8V, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control.
4.When the power supply voltage in the 8-10V, the low frequency end gain up to 30dB, at this time the amplifier has a low noise coefficient and good stability.
5.When the voltage is 12V, reach maximum gain, the low frequency end gain of 32.5dB. Package Included: 1PC 0.1-2000MHz RF Wideband Amplifier 30dB Low-noise LNA Broadband Module Receiver
0.2-1500MHz 60dB
Description:
The amplifier is based on the original 0.1-2000MHz 30dB amplifier, using two-stage cascade is made with low noise, high gain 60dB, and is suitable to detect weak signals.
Amplifier Parameters Indicators:
Operating frequency: 0.2-1500MHz
Amplifier Gain: 60dB
Maximum output power: + 10dBm (10mW) @ 1dB compression point
Working Current: 35mA (9V)
Supply voltage: 6-12V DC
System Impedance: 50ohms
The amplifier uses some tips:
1) The amplifier at the operating frequency of less than 500MHz, has a very good gain flatness. The lower the frequency, the higher the gain consistency.
2) The lower limit of the operating frequency of the amplifier input and output capacitors are subject to default is 0.1uF, it can work to 0.2MHz; you can increase the input and output capacitors to extend the lower frequency limit. Applications should pay attention to enhance the power supply decoupling and regulator.
3) When the supply voltage 5-8V changes, can be used as a variable gain amplifier, the gain with the power supply voltage increases. DA control with the power supply voltage, you can control the amplifier gain, the gain adjustment.
4) When the supply voltage is 8-10V, low-end gain of 30dB, at which point the amplifier has a low noise figure and good stability.
5) When the voltage is 12V, maximum gain, low frequency gain up to 32.5dB.
6) Since the amplifier gain very high (60dB), the input attention overload (Fmax = -50dBm), in use should follow the relevant principles of RF and microwave circuit layout.
Package Included:
1PC × 0.2-1500MHz 60dB RF Broadband Amplifier
50-4000MHz 0.6dB
Description: This RF Amplifier features low noise figure, is a LNA RF Amplifier.
Generally used as a high frequency or intermediate frequency preamplifier for a wide range of radio receivers, as well as amplifying circuits of highly sensitive electronic detection devices.
In the case of amplifying weak signal, the noise of the amplifier itself may be very serious, so it is hoped that this noise will be reduced to improve the signal-to-noise ratio of the output.
Application:
LNA for the main mobile communication base station infrastructure applications, such as wireless communication transceiver card, tower mounted amplifier (TMA), combiner, Repeaters, and distal/digital wireless wide band end equipment application design.
This RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB.
Specifications: LNA: 50-4000Mhz NF: SPF5189Z LNA0: 0.6dB Amplifier: FM Size: 34x25mm / 1.33 x1.0inch Package Included: 1PC LNA 50-4000MHz 0.6dB SPF5189 RF Amplifier
5-6000MHz 20dB
Description: This is a 5-6000MHz RF signal power amplifier with 20dB gain.
It has big dynamic range and wide operating frequency range.
The power supply voltage is 5V DC, and working current is 85mA.
Maximum output power is +21dBm(100mW)@1dB compression point.
It is suitable for all types of fixed gain amplification of RF signal.
Specifications: Operating Frequency: 5--6000MHz Amplifier Gain: 20dB Max. Output Power: +21dBm(100mW)@1dB compression point Working Current: 85mA (5V) Power Supply Voltage: 5V DC System Impedance: 50ohm Size: 34*25mm / 1.33*0.98in
Note:
In use should follow the relevant principles of RF and microwave circuit layout.
Package Included: 1PC × 5-6000MHz 20dB RF Power Amplifier Payment Method
EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right. Payment must be received in 5 business days of auction closing. Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand. 2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders. 3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Returns & Refund Policy- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
About usWe are professional Business & Industrial DIY Module part store. Follow and save our store,We will provide the best service and high quality-low price items for you.Save more
- Condition: Neu
- Frequency: 0.1-2000MHz 30dB
- Brand: Unbranded
- Color: green + gold
- Model: Signal Receiver
- Type: Power Amplifier
- Gain: 60dB/ 20dB
- Frequency Range: 0.1-2000MHz
- Diameter: 5mm
- Operating frequency: 0.2-1500MHz/5--6000MHz
- Supply Voltage: 6-12V DC/5V DC
- Working current: 35mA (9V)/85mA (5V)
- amplifier: FM
- NF: SPF5189Z
- LNA0: 0.6dB
- Marke: Markenlos
PicClick Insights - RF Amplifier Module LNA Board Broadband Signal Receiver Low Noise 0.1-6000MHz PicClick Exklusiv
- Popularität - 2 verkauft, 10 verfügbar. 0 Beobachter, 0.0 neue Beobachter pro Tag, 368 days for sale on eBay.
- Bestpreis -
- Verkäufer - 1.129+ artikel verkauft. 0.6% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.
Die Leute Mochten Auch PicClick Exklusiv
0.1-6000MHz RF Amplifier Module LNA Board Broadband Signal Receiver Low Noise F
EUR 4,46 Sofort-Kaufen 28d 4h
0.1-2000MHz Signal Receiver Low Noise LNA Broadband RF Amplifier Module SPF5189
EUR 5,80 Sofort-Kaufen 24d 13h
RF Amplifier Module Signal Receiver Low Noise LNA Board Wide Broadband
EUR 6,34 Sofort-Kaufen 11d 1h
0.1-6000MHz RF Amplifier Module LNA Board Broadband Signal Receiver Low Noise
EUR 5,34 Sofort-Kaufen 6d 21h
0.1-2000MHz Signal Receiver Low Noise LNA Broadband RF Amplifier Module SPF5189
EUR 5,13 Sofort-Kaufen 18d 5h
Signal Receiver Low Noise LNA Board Wide Broadband 0.6-60dB RF Amplifier Module
EUR 5,93 Sofort-Kaufen
8 BeobachterSignal Receiver Low Noise LNA Board Wide Broadband 0.6-60dB RF Amplifier Module
EUR 5,00 Sofort-Kaufen