150W DC12V to AC110V 220V Battery Power Inverter Converter Boost Step-up Module

Sophisticated product, please handle with care; quality first, credit upmost;  Your satisfaction is our pursuit;The strength of technology decide the quality of technology.                                         if  you have any problem,pls contact with us.

150W DC12V to AC110V 220V Battery Power Inverter Converter Boost Step-up Module

Features:

No welding, input terminals using 7.62 terminals
High frequency AC output using blue 301 terminals, DC output 7.62 terminals
Voltage can be selected arbitrarily, through the jumper cap, no welding
Output power, if there is a fan cooling, this board can output 200W power using double-sided circuit board
AC output can be connected to multiplier rectifier, or pure resistive load

parameters.
High frequency AC output port: only suitable for resistive loads, such as ordinary household incandescent bulbs (tungsten bulbs), ordinary soldering iron, or connected to the doubling rectifier circuit, measuring the output voltage do not measure this output port, because these voltmeters are designed to measure 50Hz household voltage, not measuring high frequency voltage, there will be a huge measurement error.
DC output port: you can use a multimeter DC gear to measure the voltage, you can take the switch power class load (marked input voltage AC100-240V voltage appliances can be used), resistive load. 150W inverter battery DC12V step-up to AC220V step-up transformer power conversion circuit board.
Switch: the red line black line on the board for the switch, used to control the presence or absence of high-voltage output.
Input voltage: 12V, limit low input voltage 8V, limit high input voltage 14.8V. Since there is no input fuse on this board, please add your own fuse, it is recommended to add 15A fuse (lithium battery power supply and switching power supply, DC power supply class power supply, this type of power supply will lead to tube overheating burned), the output is not regulated, the input to ensure sufficient power (current), otherwise it is easy to burn out tube.
Output voltage: 110V 200V 220V 280V
Output waveform: high-frequency square wave or DC (unfiltered)
Output power: 150W (more than 100W please add fan cooling)
No-load 12V terminal current: 250 mA
Operating frequency: 27KHZ
Protection: no protection, please add your own fuse to use
Features: no welding, input terminals using 7.62 terminals, high-frequency AC output using blue 301 terminals, DC output 7.62 terminals (directly loosen the terminal top screw, insert the wire, tighten the screw can be)
Voltage can be selected arbitrarily, through the jumper cap, no welding
Output power, if there is a fan cooling, this board can output 200W power using double-sided circuit board.
AC output: can be connected to multiplier rectifier, or pure resistive load
Output voltage: has been marked on the circuit board

Caution:
Available electrical range: switching power supply class load, generally marked with an input voltage of 100-240V appliances can generally be used, such as non-cottage cell phone chargers, set-top boxes, DVDs, LED lights (with constant-current drive, so some can be used, some LED lamps can not be used, when using only the DC output port, never connect the high-frequency AC output port) ordinary tungsten light bulbs. Small hand drill, energy-saving lamps, ordinary non-temperature-regulated soldering iron, the need for high-voltage multiplier rectifier circuit, LCD TV sets connected to the DC output port and so on.
The range of non-usable appliances: iron core transformers, such as the use of iron core transformers for audio, temperature regulating class soldering irons, dimming class lamps, AC motor class loads such as electric fans. Cheap resistive buck LED lamps and lanterns (such as LED night lights, straw hat LED lamps and lanterns, plastic housing LED lamps)

Package include.
Inverter X1

• Shipping
• Feedback
• Payment
• Return policy
• Contact us

Shipping

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days ,Please take care it.Less than 30 days,we can't take a refund.

Feedback

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

Payment

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

 

Return policy

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

 

Contact us

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

150W DC12V to AC110V 220V Battery Power Inverter Converter Boost Step-up Module Features:

No welding, input terminals using 7.62 terminals
High frequency AC output using blue 301 terminals, DC output 7.62 terminals
Voltage can be selected arbitrarily, through the jumper cap, no welding
Output power, if there is a fan cooling, this board can output 200W power using double-sided circuit board
AC output can be connected to multiplier rectifier, or pure resistive load

parameters.
High frequency AC output port: only suitable for resistive loads, such as ordinary household incandescent bulbs (tungsten bulbs), ordinary soldering iron, or connected to the doubling rectifier circuit, measuring the output voltage do not measure this output port, because these voltmeters are designed to measure 50Hz household voltage, not measuring high frequency voltage, there will be a huge measurement error.
DC output port: you can use a multimeter DC gear to measure the voltage, you can take the switch power class load (marked input voltage AC100-240V voltage appliances can be used), resistive load. 150W inverter battery DC12V step-up to AC220V step-up transformer power conversion circuit board.
Switch: the red line black line on the board for the switch, used to control the presence or absence of high-voltage output.
Input voltage: 12V, limit low input voltage 8V, limit high input voltage 14.8V. Since there is no input fuse on this board, please add your own fuse, it is recommended to add 15A fuse (lithium battery power supply and switching power supply, DC power supply class power supply, this type of power supply will lead to tube overheating burned), the output is not regulated, the input to ensure sufficient power (current), otherwise it is easy to burn out tube.
Output voltage: 110V 200V 220V 280V
Output waveform: high-frequency square wave or DC (unfiltered)
Output power: 150W (more than 100W please add fan cooling)
No-load 12V terminal current: 250 mA
Operating frequency: 27KHZ
Protection: no protection, please add your own fuse to use
Features: no welding, input terminals using 7.62 terminals, high-frequency AC output using blue 301 terminals, DC output 7.62 terminals (directly loosen the terminal top screw, insert the wire, tighten the screw can be)
Voltage can be selected arbitrarily, through the jumper cap, no welding
Output power, if there is a fan cooling, this board can output 200W power using double-sided circuit board.
AC output: can be connected to multiplier rectifier, or pure resistive load
Output voltage: has been marked on the circuit board

Caution:
Available electrical range: switching power supply class load, generally marked with an input voltage of 100-240V appliances can generally be used, such as non-cottage cell phone chargers, set-top boxes, DVDs, LED lights (with constant-current drive, so some can be used, some LED lamps can not be used, when using only the DC output port, never connect the high-frequency AC output port) ordinary tungsten light bulbs. Small hand drill, energy-saving lamps, ordinary non-temperature-regulated soldering iron, the need for high-voltage multiplier rectifier circuit, LCD TV sets connected to the DC output port and so on.
The range of non-usable appliances: iron core transformers, such as the use of iron core transformers for audio, temperature regulating class soldering irons, dimming class lamps, AC motor class loads such as electric fans. Cheap resistive buck LED lamps and lanterns (such as LED night lights, straw hat LED lamps and lanterns, plastic housing LED lamps)

Package include.
Inverter X1

• Shipping
• Feedback
• Payment
• Return policy
• Contact us

Shipping

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.All package need to wait 30 days ,Please take care it.Less than 30 days,we can't take a refund.

Feedback

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.

Payment

1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

 

Return policy

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

 

Contact us

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

---

Am 04.11.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:

• Condition: Neu
• Marke: Markenlos
• Brand: Unbranded
• Type: Step-Up Voltage Regulator
• Mounting Style: PCB Mount
• Current Conversion: DC to AC
• Minimum Operating Temperature: -40 °C
• Maximum Operating Temperature: 85 °C
• Nominal Voltage Rating (DC): 12 V

Siehe Mehr