4-20mA Signalquelle Generator Current transducer test 9 programmierbare Ausgabe
Features:
-
LCD (with backlight).
-
9 programmable output (can simulate the actual environment of dynamic
testing, each section can be set up t running time /A current /b
current).
-
Digital rotary encoder adjustment (the use of potentiometer, easily
affected by temperature and humidity, the resistance value will change).
-
Can be connected to the positive and negative (two-wire system, no matter how wiring, can work, will not burn meter).
-
High precision, good linearity (display accuracy of "0.05" of the decimal point, the actual output accuracy of + 0.5%) (two).
-
Imported chips, ultra-low power consumption, no heat, more stable output.
-
The shell is beautiful and easy to install.
Specifications:
Output current: 3mA- -21mA
Power supply voltage: 15V- -30V
Sample resistance: 10 Ω -500Ω
Display accuracy: 0.05
Output accuracy: ±0.5%
Dimensions (front) : 79.5 x 42mm/3.13 x 1.65inch
Dimensions (after) : 72.5 x 39.5mm/2.85 x 1.55inch
Installation panel: 77 x 40mm/3.03 x 1.57inch
System operation:
1.The working mode of the signal generator is two: 1, manual adjustment mode; 2, dynamic output mode;
2.Manual mode adjustment output current: rotary encoder knob, clockwise current increase, counter clockwise current decreases;
3.The
manual mode saves the output value, short press encoder knob, after the
opening, the screen shows "...", saved successfully, output the next
boot is the value stored value; when debugging equipment, we need to
adjust the random output values, as long as you don't press the encoder
knob after reboot or the original save this value;
4.Dynamic output mode: is a programmable set of good curve continuous automatic output;
5.Parameter
setting:
(1).Press the encoder knob, after 5 seconds, enter the set state,
the first parameter "model": the screen FUNX X said the number of
segments in the curve, the rotary encoder knob to adjust the value of X,
X=0 said there is no curve in manual mode, X>0 uses dynamic output
mode;
(2). After adjusting the first parameter "mode of operation",
press the encoder knob again. If X=0, exit the setting mode and enter
the manual mode. If X>0, then enter the first curve;
(3). Each
curve is provided with 3 parameters, "tXXX" running time "AXXX" "bXXX"
to end the current starting current, so enter the first curve set, the
screen shows "t1XX", the rotary encoder knob to adjust the value of XX,
the running time adjustment range 1--99 seconds;
(4). Then click the
encoder knob into the first curve of the "start current" settings, the
screen shows "A1XX", the current setting range 3-21 mA;
(5). Then
click the encoder knob to enter the first curve of the "end of the
current" settings, the screen shows "b1XX", the current setting range
3-21 mA;
(6). Second curves and so on, until set the number of the end of the set, automatically exit the set state;
(7). If
the next time just need to change one of the parameters, the parameters
remain unchanged, then set the length of the encoder button for 5
seconds can be set directly out of the state;
Package Included:
1 x 4-20mA Signal Generator
-
Bitte beachten Sie dabei, dass wir nur Paypal als Zahlungsart akzeptieren.
-
Bitte zahlen Sie für
Ihre Artikel innerhalb von 4 Tagen nach der Auktion endet. Eine
Nichtzahlungsdebatte ist leider geöffnet, wenn volle Zahlung nicht
empfangen wird.
-
Alle Artikel werden nach Käufers ebay-Adresse versendet. Bevor Sie zahlen, stellen Sie bitte sicher, dass Ihre Adresse in ebay die Adresse, die Sie möchten, dass wir zu versenden. Irgendwelche die nicht-empfangenen Einzelteile, die durch unzulässige Adresse verursacht wurden, registrierten PayPal sind nicht in unserer volle Rückerstattung oder Ersatz Politik (Wenn Sie die Adresse ändern, pls. Eine Notiz, wenn Sie die Zahlung leisten).
-
Eine Benachrichtigung per E-Mail der Absendung an den Käufer gesendet werden, nachdem Einzelteil bekannt. Bitte mailen Sie uns, wenn Sie unsere E-Mail nach 5 Tagen der vollen Zahlung gesendet empfangen.
-
Alle Artikel werden innerhalb von 48 Stunden nach Zahlungseingang versendet. Sie sollten in der Lage, Artikel innerhalb von 4 Wochen erhalten. Wir können keine Garantie für die Lieferfrist, wenn die Post irgendwelche unerwarteten Verzögerungen wegen Urlaub, Wetter, Gewohnheiten oder andereren Bedingungen. Manchmal kann es bis zu 40-50 Tage oder länger für Anlieferung. Mailen Sie uns, wenn Einzelteile nicht nach 50 Arbeits erhalten nach voller Zahlung.
-
Unser Listenpreis umfaßt den Wert von Waren, Verpackung Kosten und Export Steuern, nicht einschließlich internationale Einfuhrzölle.
-
Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten.
-
Die Einfuhrzölle sind Verantwortlichkeit Check Käufer mit Zollamt Ihres Landes, welche zusätzlichen Kosten vor dem Kauf sein.
-
Alle Streitigkeiten aus den Einfuhrzöllen wird zu eBay für Lösung vorgelegt werden.
1. Alle mögliche Fragen, kontaktieren Sie uns bitte über ebay Mitteilung oder mailen Sie uns. Wir werden Ihre Nachricht innerhalb von 48 Stunden antworten. Wenn Sie unsere Antwort nicht innerhalb von 48 Stunden erhalten, bitte posten Sie eine Nachricht erneut, weil manchmal unser Nachrichtensystem einige E-Mails blockieren kann.
2. Wenn Sie mit unserem Service zufrieden sind, bitte lassen Sie uns ein positives Feedback und geben uns die ausführliche Verkäufer-Bewertung mit allen „5 Sterne“ in sehr Bereich
3. Unser Ziel ist, Top-Level-Kundenservice zur Verfügung zu stellen, Ihre Anerkennung wird uns sehr ermutigen und Ihnen besser dienen. Wir bemühen uns, alle unsere Kunden zufrieden zu stellen.
4. Wir freuen uns über Ihr POSITIVES Feedback. Bitte lassen Sie kein negatives Rückgespräch, ohne um Hilfe zu bitten. Vielen Dank!
Wir werden immer
unsere am meisten tun, um Ihre Erwartungen im Kundenservice,
Kommunikation und Versand Ihrer Aufträge zu übertreffen.
|