Verkäufer:sales_bk_electronics✉️(9.858)100%,
Artikelstandort:Essex, Essex, GB,
Versand nach: GB und viele andere Länder,
Artikelnummer:373687564736Celestion AN3510 Full Range Antriebseinheit.
Celestion AN3510
Using their market-leading experience in the design of high- performance, small-format professional audio drive units, Celestion has created an all-new range of compact and lightweight loudspeakers that are ideally suited to many sound reinforcement applications.
These drivers have been optimized using Finite Element Analysis (FEA) to give a wider dispersion characteristic than conventional loudspeakers of this size. In addition, they feature a space-efficient square chassis profile allowing them to be positioned more closely to each other for improved coupling.
With Celestion's Compact Array Drivers, systems designers are now able to build into their products some of the principal advantages offered by line array designs: a more even distribution of the acoustic signal and the ability to project sound over greater distances.
Loudspeaker Designs
Loads of speaker designs available on the internet just Google Celestion AN3510 but to get you started we have a line array design HERE
The MICROMAX line array project
Features
Compact and lightweight, full-range neodymium loudspeakers
Advanced Finite Element Analysis techniques used for acoustic, mechanical and electromagnetic modelling
Ideal for applications such as portable line arrays where actively controlled wavefront (beam steering) is used
Delivers wider dispersion to higher frequencies than many equivalent compact, full-range drivers on the market
Chassis purpose-designed for maximum free air movement, with square mounting frame to facilitate close coupling of multiple units
Stiff and light aluminium cone remains rigid to higher frequencies, delivering a smoother response in the critical listening band
Half roll elastomer surround provides damping for unwanted resonances and sustained centring control at extremes of excursion
Designed to be weather resistant for outdoor applications
Check out the Animation Video On YouTube
https://youtu.be/sKFg8Zf9Lq8
General Specifications
Small Signal Parameters
Nominal diameter
88mm/3.5in
Power rating1
35Wrms
Nominal impedance
8Ω
Sensitivity2
87dB
Frequency range
98Hz-18.5kHz
Voice coil diameter
25mm/1.0in
Chassis type
Glass reinforced ABS
Magnet type
Neodymium
Voice coil material
Round Copper
Former material
Polyimide
Cone material
Aluminium
Surround materia
Elastomer
Xmax3
1.25mm/0.04in
Gap depth
4mm/0.14in
Voice coil winding width
6.5mm/0.23in
Sd
38.48cm2/5.98in2
D
70mm/2.76in
Fs
98Hz
Mms
3.37g/0.12oz
Qms
6.59
Qes
0.66
Qts
0.67
Re
5.73Ω
Vas
1.3lt/0.046ft3
Bl
4.5Tm
Cms
0.62mm/N
Mounting Information
8Ω Frequency Response
Overall depth
38.48cm2/5.98in2
Overall size
70mm/2.76in
Cut-out diameter
98Hz
Fitting
3.37g/0.12oz
Mounting PCD range
6.59
Unit weight
0.66
Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Measured on axis at 1W, 1m in 2Π anechoic environment.