Mini HC-SR505 /360° Ceiling Infrared PIR Body Motion Sensor Lamp Light Detector

EUR 6,88 Sofort-Kaufen, EUR 0,94 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: mecklenburg8 ✉️ (36.642) 99.7%, Artikelstandort: 深圳, 廣東省, CN, Versand nach: WORLDWIDE, Artikelnummer: 263545713239 Mini HC-SR505 /360° Ceiling Infrared PIR Body Motion Sensor Lamp Light Detector.

Mini HC-SR505 /360° Ceiling Infrared PIR Body Motion Sensor Lamp Light Detector Product Overview: HC-SR505  Technical parameters:
Operating Voltage Range: DC4.5-20V
Static current: <60uA
Output level: High 3.3V / Low 0V
Trigger: repeatable trigger (default)
Delay time: Default 8S + -30% (can be customized range of a few tenths - tens of minutes)
PCB Dimensions: 10 * 23mm
Induction angle: <100 degree cone angle
Induction distance: 3 meters
Working temperature: -20 - +80 degrees
Sensor Lens Dimensions: Diameter: 10mm (default)

more description about HC-SR505, click the following picture:   360° Ceiling PIR Infrared Body Motion Sensor Specifications:
1.Power Sourcing:220V-240V/AC
2.Power Frequency:50Hz
3.Ambient Light: 3-2000LUX (Adjustable)
4.Time-delay adjustment: Min. 10+-3sec; Max. 7+-2min.
5.Rated Load:1200W Max. Tungsten; 300W Max. Florescent
6.Detection Range:360°
7.Working Temperature:-10~+40℃
8.Working Humidity:<93%RH
9.Installing Height:2.5m~3.5m
10.Power Consumption:0.45W (Work); 0.1W (Static)
12.Detection Motion Speed:0.6~1.5m/s more description about 360° Ceiling FIR infrared, click the following picture:
Package Included: 1x Infrared Motion Sensor HC-SR501 Product Type: HC--SR501 Body Sensor Module Operating voltage range: DC 4.5-20V Quiescent Current: <50uA Level output: High 3.3 V /Low 0V Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger) Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second) Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds Board Dimensions: 32mm*24mm Angle Sensor: <100 ° cone angle Operation Temp: -15-+70 degrees Lens size sensor: Diameter:23mm(Default) Features:
1, the automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic delay off high, output low.
2,the photosensitive control (optional, factory is not set) may set the photosensitive control during the day or light intensity without induction.
3, the temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises to 30 ~ 32 ℃, slightly shorter detection range, temperature compensation can be used as a performance compensation.
4, two trigger mode: (can be selected by jumpers) a, can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically become low from high; b, repeatable trigger: the sensor output high after the delay period, if the human body in its sensing range activities, its output will remain high until after the delay will be left high to low (sensor module review Measured activities of each body will be automatically extended after a delay time, and the final event of the delay time Starting point of time).
5, with induction blocking time (the default setting: 2.5S block time): sensor module, after each sensor output (high change Into a low level),you can set up a blockade followed by time period, in this time period the sensor does not accept any sensor signal. This feature can have a "sensor output time" and "blocking time" the interval between the work produced can be applied to detect the interval Products; also inhibit this function during load switching for a variety of interference. (This time can be set at zero seconds - Tens of seconds).
6, the working voltage range: the default voltage DC4.5V-20V.
7, micro-power consumption: static current "50 microamps, especially for battery-powered automatic control products.
8, the output high level signals: types of circuits can be easily and docking. Instructions:
1. Sensing module for about a minute after power initialization time, during the interval to the output module 0-3 times a minute in standby mode. 2. Should avoid direct lighting such as interference sources close the surface of the lens module so as to avoid the introduction of interference signal generator malfunction; use of the environment to avoid the flow of the wind, the wind sensor will also cause interference. 3. Sensor module using a dual probe, the probe's window is rectangular, dual (A per B million) in the direction of the ends of long, when the body passed from left to right or right to left when the reach the dual IR time, distance difference, the greater the difference, more sensitive sensors, when the body from the front to the probe or from top to bottom or from bottom to top direction passing, dual IR not detected changes in the distance, no difference value, the sensor insensitive or does not work; so the sensors should be installed dual direction of the probe with human activities as much as possible parallel to the direction of maximum to ensure that the body has been passed by the dual sensor probe. To increase the sensing range of angles, the module using a circular lens, the probe also makes sense on all four sides, but still higher than the upper and lower left and right direction of sensing range, sensitivity and strong, still as far as possible by the above installation requirements.VCC, trig (control side), echo (receiving end), GND 4. Dimensions and Adjustment: Note: The potentiometer clockwise to adjust the distance, sensing range increases (about 7 meters), on the contrary, sensing range decreases (about 3 meters).Delay adjustment potentiometer clockwise rotation, sensor delay longer (about 300S), the other hand, induction by the short delay (about 5S).  5. Applications a, Security Products b, the human body sensors toys c, the human body sensor lighting d, industrial automation and control, etc. It can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans,automatic washing machine and dryer Machines and other devices,is a hightech products. Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems. Package list : 1PCS Motion Sensor Detector Refund
  • If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money. We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.

  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Shipping

1. We ship to Worldwide. 2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address. 3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee. 4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays. 5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service. 6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.

Payment
  • We only accept payment through Paypal. Items will go to post within 1-2 business days after payment confirmed.
Feedback

* When you satisfied with our product and services please leave us positive feedback.

* If you have got the package, please confirm "Delivery on time" For us.

* If a problem occurs, contact us immediately with any email request.

* Just contact us using the " Ask the seller a question" link on eBay.


Am 12.03.18 hat der Verkäufer die folgenden Angaben hinzugefügt:

  • Condition: Neu
  • select: 360° Ceiling
  • Model: ALL
  • Marke: Markenlos
  • Brand: Unbranded/Generic

PicClick Insights - Mini HC-SR505 /360° Ceiling Infrared PIR Body Motion Sensor Lamp Light Detector PicClick Exklusiv

  •  Popularität - 5 Beobachter, 0.0 neue Beobachter pro Tag, 2.210 days for sale on eBay. Super hohe beobachtend. 11 verkauft, 10 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 36.642+ artikel verkauft. 0.3% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv