SmallRig A7 IV Camera Cage Kits for Sony Alpha 7R IV|Alpha 7S III|Alpha 1|A 7R V

EUR 123,90 EUR 111,51 Sofort-Kaufen oder Preisvorschlag, Klicken Sie hier, um die Versandkosten anzuzeigen, eBay-Käuferschutz
Verkäufer: Top-Rated Seller smallrig_official_de ✉️ (4.806) 99.9%, Artikelstandort: DE, Versand nach: DK und viele andere Länder, Artikelnummer: 404462215262 SmallRig A7 IV Camera Cage Kits for Sony Alpha 7R IV|Alpha 7S III|Alpha 1|A 7R V. SmallRig Full Cage for Sony Alpha 7 IV/Alpha 7S III/Alpha 1 3667   Key Features: 1. One-piece full cage protects camera 2. Spindle spanner at the battery door fits camera curve and enhances grip experience 3. Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoes and NATO rails support handles, microphones, LED lights, monitors, etc. 4. Two-point locking: fixes camera via one 1/4"-20 screw at the bottom and the shoulder strap hole on the left side (with 2 sliders, suitable for different models) 5. Arca quick release plate on the bottom for quick switching between tripod, stabilizer (DJI RS 2/RSC 2) and handheld shooting
  • 💕Neue Ankunft
    • 📆Wöchentliche Deals
      • 📷Kamerakäfig
        • for Sony
        • for Nikon
        • for FUJIFILM
        • for Canon
        • for Panasonic
        • for BMD
        • for Gopro
        • for field monitors
        • for DJI
      • 🎥Universelles Zubehör
        • Montagehalterung
        • HDMI-Kabel&Klemme
        • Handgriff
        • Schraubenzieher
        • Kartenetui
        • Trageriemen&Taschen
      • 🎬Stabilisator-Zubehör
        • 🔋Power-Lösung
          • 📸Kamerastativ
            • 📹Schulter-Rig
              • 💡Fotografie Licht
                Paket enthält: 1* Cage for sony a7 iii /a7iv /  a7r v / a7r iv /a1-3667B:👍 [Click Lick for Detail]   1* Arri Camera Top Handle 3765 👍 [Click Lick for Detail] 1*   Mini Seitengriff (1/4 ”-20 Schrauben) 2916 👍 [Click Lick for Detail]   About this item-Camera Cage 3667B  
                • Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.
                • For Sony A7R V/A7 IV/A7S III/A1/A7R IV :  SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The Cable Clamp for HDMI 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.
                • Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428 .
                • Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV
                • All-Round Protection: Built-in all-round rubber gasket to prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage.
                • Built-in Quick Release Plate: The bottom quick release plate for Arca has added 1/4"-20 holes with a spacing of 18mm, which is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, and can also be adapted to DJI RS 2 / RSC 2 stabilizer mounting board (riser plate) and SmallRig Quick Release Plate for Arca 3154.
                About this item-ARRI Locating Handle(Lite)3765  
                • Compatibility : SMALLRIG Top Handle with Locating Holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal cold/hot shoe mount
                • Lightweight Only 124g : Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone
                • Built-in Cold Shoe Mounts : It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories
                • Mounting Points: SMALLRIG Camera Grip has an abundance of 1/4"-20 and 3/8"-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble
                • Related Products: 3/8"-16 locating holes support Monitor Mount 2903, 2348 to attach monitors; 1/4"-20 threaded holes support Magic Arm 2070 for monitors  
                • About this item-Mini Seitengriff   2916  
                Über diesen Artikel:Mini Seitengriff (1/4 ”-20 Schrauben) 2916  
                • Für Kamera Cage: Der SMALLRIG Mini-Seitengriff 2916 ist für Kamera cage ausgelegt. Es wird an der Seite der Kamera cage angebracht, um spiegellose Digitalkameras und andere kleine Kameras aufzunehmen. Die Länge zwischen die zwei Schrauben ist 18mm. Tipps: Wenn Sie große Hände haben, empfehlen wir Ihnen, SmallRig Wooden Handle 2093 zu kaufen.
                • Linker und rechter Schalter: Der Verbindungsteil der 1/4'' - Schrauben kann entfernt werden, sodass der Griff ausgetauscht werden kann, um als linkshändiger oder rechtshändiger Griff montiert zu werden. Es kann je nach Bedarf nach oben und unten angepasst werden, um der unterschiedlichen Käfighöhe zu entsprechen
                • Komfortabler Griff: Der SMALLRIG-Seitengriff 2916 besteht aus einer Aluminiumlegierung und Kunststoff (PC-ABS) mit ergonomischem Design. Der tragbare Griff bietet Filmemachern ein reibungsloses und komfortables Aufnahmeerlebnis
                • Befestigungspunkte: Dieser Mini-Seitengriff verfügt über 1/4 '' - Gewindebohrungen und eine Riemenöse für weiteres Zubehör wie den SMALLRIG Cold Shoe 1241 und den SMALLRIG Wrist Strap PAC2456
                • Hinweis: Die maximale Tragfähigkeit des Griffs beträgt 3,5 kg. Dieser Griff dient als Minigriff. Bitte überprüfen Sie andere Griffe, wenn Sie größere bevorzugen
                • SmallRig Mini-Seitengriff (1/4 ”-20 Schrauben) 2916 ist für spiegellose Digitalkameras und andere kleine Kameras konzipiert. Zwei 1/4 ”-20 Schrauben sind an der Seite des Cages befestigt. Der Griff unterstützt zusätzliche Montagemöglichkeiten - Der Blitz und das Mic können über den Cold Shoe 1241 montiert werden, und die Handschlaufe wie 2456 kann über die Öse montiert werden, um ein versehentliches Herunterfallen der Kamera zu verhindern. Hoch einstellbar, um unterschiedliche Cagehöhen anzupassen und den Schnellwechsel von Linkshänder zu Rechtshänder durch den eingebauten Schraubenschlüssel zu unterstützen. Kompatibel mit 2808 usw. Der tragbare Griff aus Aluminiumlegierung und Kunststoff (PC + ABS) mit ergonomischem Design bietet Filmemachern ein reibungsloses und komfortables Aufnahmeerlebnis.

                   

                  Designer: Jiang Tao , Abby Huang


                  Hinweis:
                  1. Die maximale Tragfähigkeit des Griffs beträgt 3,5 kg. Bitte nicht überladen.
                  2. Dieser Griff dient als Mini-Griff. Bitte überprüfen Sie andere Griffe auf unserer Website, wenn Sie größere bevorzugen.

                   

                  Kompatibilität:
                  Jeder Käfig mit zwei 1/4 ”-20 Gewindebohrungen mit einem seitlichen Abstand von 18 mm.

                   

                  Lieferumfang:
                  1 x Griff
                  1 x Sechskantschlüssel

                   

                  Produktabmessungen: 76 x 42 x 100 mm
                  Verpackungsmaße: 121 x 105 x 45 mm
                  Nettogewicht: 139g±5g
                  Packet-Gewicht: 178g±5g
                  Material: Aluminiumlegierung, Kunststoff (PC + ABS)

                Vergleich Produkte
                Top Handle for ARRI Type Top Handle for ARRI Type Adjustable Top Handle for ARRI-Style NATO Top Handle NATO Top Handle Universal Top Handle
                Compatibility Accessories for ARRI Type Hole Accessories for ARRI Type Hole Accessories for ARRI Type Hole Accessories with NATO Rail Accessories with NATO Rail Accessories with 1/4" Holes
                Types Lite Pro Advanced Lite Pro Pro
                Locating Holes for ARRI 2 3 3 2 2 2
                Maximum Load 10kg / 22Ib 15kg / 33Ib 15kg / 33Ib 10kg / 22Ib 15kg / 33Ib 15kg / 33Ib
                Cold Shoe Mounts 5 3 3 5 3 3
                Forward & Back Adjust / / /
                Hand grip length 135mm / 5.2inch 135mm / 5.2inch 134mm / 5.2inch 135mm / 5.2inch 118mm / 4.6inch 118mm / 4.6inch
                Material Aluminum Alloy, Silicone, Stainless Steel Aluminum Alloy, Stainless Steel Aluminum alloy Aluminum Alloy, Silicone, Stainless Steel Aluminum alloy Aluminum alloy
                Net Weight(Ib) 0.27 0.30 0.34 0.27 0.33 0.30
                Product Dimensions(inch) 5.3 X 1 X 2.9 inch 5.3 X 1 X 2.9 inch 5.2 X 2.7 X 1.1 inch 5.3 X 1 X 2.8 inch 4.6 X 1 X 2.6 inch 4.6 X 2 X 2.3 inch
                ID 3765 2165C 4153 3766 1955 1984
                From the Brand


                Am 14.12.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:

                • Condition: Neu
                • Compatible Model: Sony Alpha7S III
                • Manufacturer Warranty: 2 Years
                • Country/Region of Manufacture: China
                • MPN: 3667
                • Compatible Brand: For Sony
                • Color: Black
                • Brand: SmallRig
                • Connectivity: HDMI/Micro HDMI
                • Mount Type: Snap-On
                • Compatible Series: For Sony Alpha
                • Features: A one-piece full cage protects the camera.
                • Material: Aluminum
                • To Fit: Camera, Accessory: Tripod, Accessory: Flash
                • Type: Not Found
                • Model: 3667
                • Item Weight: 190g±5g
                • Marke: SmallRig
                • Modell: 3667B+3765
                • Produktart: für Sony A7S III|Alpha 7R IV||Alpha 1|A 7R
                • EAN: 6941590009711

                PicClick Insights - SmallRig A7 IV Camera Cage Kits for Sony Alpha 7R IV|Alpha 7S III|Alpha 1|A 7R V PicClick Exklusiv

                •  Popularität - 14 Beobachter, 0.1 neue Beobachter pro Tag, 215 days for sale on eBay. Super hohe beobachtend. 12 verkauft, 11 verfügbar.
                •  Bestpreis -
                •  Verkäufer - 4.806+ artikel verkauft. 0.1% negativ bewertungen. Top-Bewertung Plus! Verkäufer mit Top-Bewertung, 30-Tage-Rückgaberecht, Schiffe in 1 Werktag mit Tracking.

                Die Leute Mochten Auch PicClick Exklusiv